MX-7000N AR-PF1 11 – 1
MX-7000N
Service Manual
[11] AR-PF1
1. Unpacking
A. Check the packed items
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn OFF the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Open the front cabinet.Turn OFF the power switch in the front
cabinet of the main unit.
3)
Disconnect the power plug of the main unit from the power out-
let.
B. Removal of the control box
* If cables are connected to the control box, remove all cables.
1)
Remove the screw of right rear cabinet, push down the right
rear cabinet. Disengage the pawls, and remove the right rear
cabinet so that slide to the front side.
2)
Remove the screws of control box. Raise the finger handle,
and pull out gently the control box.
* If the fax box unit is not installed, progress to the steps 4).
* If the fax box unit is installed, part of the control box that
pulled out should be within 7cm because there is a possibil-
ity of hanging the I/F cable of the fax box unit.
AR-PF1 barcode font ROM PWB
No.
Names of bundles
Quantity
1
CD-ROM
1
2
Operation manual
1
1
2
"OFF"
"OFF"
"OFF"
3
4
1
2
3
1
1
2
2
7cm
