MX-7000N MX-FNX3 7 – 2
B. Removal of the protection material
1)
Remove the fixing tapes and protection material.
2)
Open the front upper door, and remove the fixing tapes and
protection material.
3)
Remove the screws and remove the fixing material for the
paper exit tray. (four positions)
C. Check the packed items
1)
Check that all the items are included in the package.
2. Installation
<Note before installation>
* When the MX-FNX3 is installed, first install the MX-RBX2, and
then install the MX-FNX3.
* When the MX-FNX3 and MX-PNX2 is installed at the same time,
first install the MX-PNX2, and then install the MX-FNX3.
* When the MX-FNX3 and MX-CFX1 is installed at the same time,
execute the installation procedure of MX-CFX1.
No.
Names of bundles
Quantity
1
Binding head round tapping M4x8
2
2
IT tapping M4x20
2
3
Binding head M4x12
4
4
Step screw B
2
5
Rail
1
6
Rail reception sheet metal
1
7
Connection fixture F (for x3)
1
8
Connection fixture R (for x3)
1
9
Staple position label (For scanner)
1
10
Staple position label (For DSPF)
1
11
Punch position label (For scanner)
1
12
Punch position label (For DSPF)
1
1
8
9
2
3
4
5
6
7
10
X3
X3
12
11
