MX-7000N MX-CFX1 5 – 4
4)
Close the front cover of the finisher (or Punch unit).
5)
Remove the screws on rear side of the finisher (or Punch unit),
and remove the rear cover.
6)
Attach the fixing screw (Package part No. 4 of MX-FNX3 or
MX-FNX4).
7)
Install the rear cover of the finisher (or Punch unit) with the fix-
ing screws.
D. Install of the latch reception parts and the
positioning pin
1)
Install the latch reception parts (Package part No. 8) to the
main unit with the fixing screws (Package part No. 1).
2)
Install the positioning pin (Package part No. 9) to the main unit
with the fixing screws (Package part No. 3).
* Be careful to the direction of the installation.
