20
ENGLISH
FRANÇAIS
ESPAÑOL
•
Gamma Adjustment:
Adjust the Gamma to choose how the TV will respond to the content grayscale. In a dark
room choose a Higher number like 2. In a brighter area select a Lower number like 0. In general, 1 is normally
recommended.
NOTE
• Some models don’t support this function.
•
RGB Only Mode:
View images based on default settings or choose the color red,blue or green.
Apply Picture Settings:
Adjust current picture mode to apply to all sources or just current source.
Reset Picture Settings:
Reset all the picture settings in the current picture mode to the factory default values.
Sound Menu
Sound Mode:
Select a preset sound mode to suit the type of
content you are listening to:
Standard
,
Theater
,
Music
,
Speech
and
Late Night
.
Once you choose the mode, you can adjust the audio based on the
following settings:
Total Sonics:
Optimizes overall sound quality by
increasing bass, making dialog clear and natural, and widening
the sound field.
Total Surround:
Provides surround sound
experience with psycho-acoustic processing to place sounds
beside, behind, and above the viewer. For best results use with Total Sonics.
Total Volume:
Maintains consistent loudness levels from wide dynamic range programs, loud
commercials, and channel or input changes.
Wall Mount setup:
Automatically optimize the sound based on the position of the TV.
Advanced Audio Settings:
Tune the audio settings and quality of the TV.
•
Balance:
Adjust the left and right speaker strength to optimize audio for a specific location.
•
TV Speaker:
Disable the TV speaker when you are using a sound bar, ARC or any other external audio amplifier.
•
Digital Audio Out:
Select the digital audio output format that best suits the audio device type. For example,
choose
RAW
(which is uncompressed audio in RAW form) if you have 5.1 Channel Surround Sound Speaker set
up. Choose
PCM
if you have an amplifier that does not support Dolby Digital technology.
•
Digital Audio Delay:
Adjust the digital audio output delay time to sync sound from an external speaker with the
images on the TV.
•
Lip Sync:
Synchronize the displayed image with the audio output.
•
Equalizer:
Boost the volume at different frequencies.
•
Preferred Audio Language:
Set the default audio output language for the type of digital broadcast content that
you’re viewing.
•
Audio Out:
Change the way audio is sent through the type of device that’s connected to your TV Audio Out port.
Reset Default Audio Settings:
Reset all of the audio settings in current audio mode to the factory default values.
Sound Mode:
Standard
Wall Mount Setup
Advanced Audio Settings
Reset Default Audio Settings
Sound
Select a preset sound mode to suit
the type of content you are
listening to.
w
y
x
Off
