LC-37XD10E/RU
5 – 18
9. IC1712: VHIMP1410ES-1
Step Down Converter.
10. IC1706: VH+-1
Step Down Converter
Pin No.
Pin Name
I/O
Pin Function
1
BS
I
High-Side Gate Drive Boost input.
BS supplies the drive for the high-side n-channel MOSFET switch.
Connect a 10nF or greater capacitor from SW to BS to power the high-side switch.
2
IN
I
Power input.
IN supplies the power to the IC, as well as the step-down converter switches.
Drive IN with a 4.75V to 15V power source.
Bypass IN to GND with a suitably large capacitor to eliminate noise on the input to the IC.
See input Capacitor.
3
SW
O
Power Switching Output.
SW is the switching node that supplies power to the output.
Connect the output LC filter from SW to the output load.
Note that a capacitor is required from SW to BS to power the high-side switch.
4
GND
-
Ground.
5
FB
I
Feedback input.
FB senses the output voltage to regulate that voltage.
Drive FB with a resistive voltage divider from the output voltage.
The feedback threshold is 1.22V.
See Setting the Output Voltage.
6
COMP
-
Compensation Node.
COMP is used to compensate the regulation control loop.
Connect a series RC network from COMP to GND to compensate the regulation control loop.
See Compensation.
7
EN
I
Enable input.
EN is a digital input that turns the regulator on or off.
Drive EN high to turn on the regulator, drive it low to turn it off.
For automatic startup, leave EN unconnected.
8
N/C
-
No Connect.
Pin No.
Pin Name
I/O
Pin Function
1
BS
I
High-Side Gate Drive Boost lnput.
BS supplies the drive for the high-side n-channel MOSFET Switch.
Connect a 4.7nF or greater capacitor from SW to BS to power the high side switch.
2
IN
I
Power input.
IN supplies the power to the IC, as well as the step-down converter switches.
Drive IN with a 4.75V to 23V power source.
Bypass IN to GND with a suitably large capacitor to eliminate noise on the input to the IC.
See Input Capacitor.
3
SW
O
Power Switching Output.
SW is the switching node that supplies power to the output.
Connect the output LC filter from SW to the output load.
Note that a capacitor is required from SW to BS to power the high-side switch.
4
GND
-
Ground. (Note: Connect the exposed pad on backside to Pin4).
5
FB
I
Feedback input.
FB senses the output voltage to regulate that voltage.
Drive FB with a resistive voltage divider from the output voltage.
The feedback threshold is 1.222V.
See Setting the Output Voltage.
6
COMP
I
Compensation Node.
COMP is used to compensate the regulation control loop.
Connect a series RC network from COMP to GND to compensate the regulation control loop.
In same cases, an additional capacitor from COMP to GND is required.
See Compensation.
7
EN
I
Enable input
EN is a digital input that turns the regulator on or off.
Drive EN high to turn on the regulator, drive it low to tum it off.
For automatic startup, leave EN unconnected.
8
SS
I
Soft Start Control input.
SS controls the soft start period.
Connect a capacitor from SS to GND to set the soft-start period.
A 0.1
µ
F capacitor sets the soft-start period to l0ms
To disable the soft-start featur CIeave SS unconnected.
Summary of Contents for LC-37XD10
