Sharp LC-37XD10, Service Manual

Page: 30 / 190

LC-37XD10E/RU
3 – 13
9. Initialization to factory settings
Caution: When the factory settings have been made, all user setting data, including the channel settings, are
initialized. (The adjustments done in the adjustment process mode are not initialized.) Keep this in
mind when initializing these settings.
1 Factory settings [Factory setting with adjustment process mode]
䊶
Enter the adjustment process mode.
(See to below caution)
䊶
Move the cursor to [Factory Init] on page 2/13.
䊶
Use the R/C
㵘㵘
key to select a region from
[EURO/UK/ITALY/FRANCE/RUSSIA]and press the [OK]
㵘
key.
䊶
“EXECUTING” display appears .
䊶
After a while, "OK" display appears, the setting is
completed.
[Factory setting with R/C key]
䊶
Enter the adjustment process mode.
䊶
Push a remote controller code of each destination. (See below )
䊶
It automatically becomes in the process adjustment menu (INIT)
and change FACTORY INIT becomes "EXECUTING" display.
䊶
After a while, "OK" display appears, the setting is completed.
destination R/C code
37XD10K
䊶䊶䊶䊶䊶
A8(Hex)
37XD10I
䊶䊶䊶䊶䊶
E8(Hex)
37XD10F
䊶䊶䊶䊶䊶
E9(Hex)
37XD10R
䊶䊶䊶䊶䊶
EB(Hex)
37XD10E
䊶䊶䊶䊶䊶
FE(Hex)
The following items are initialized in the factory setting.
1. User settings
2. Channel data (e.g. broadcast frequencies)
3. Maker option setting
4. Password data
After adjustments, exit the adjustment process mode.
To exit the adjustment process mode, turn off the MAIN power key.
When the power is turned off with the remoto control, unpulug the AC power cord and plug it back in.
ends by turning off the
MAIN POWER key.
Adjustment item Adjustment conditions Adjustment procedure