OPERATOR’S MANUAL
P 44 / 57
B
、
Cautions for Unpacking:
1
、
To transport the machine, it is necessary to support the machine with the crated case or pallet
to avoid the damages. In case of damages, please contact our agent or the transporter.
2
、
After unpacking, check and see if all tools and accessories are intact without shortage,
otherwise, please contact our agent.
3
、
Restore the headstock to its normal position after unpacking.
4
、
After unpacking, do not move the guard rail sliding surfaces and work table as long as the
rustproof oil on them are not cleaned off and followed with the lubrication.
5
、
Before the cleaning starts, the sliding protective pieces must be dismantled, and all guard rail
sliding surface setting levers, loosened. When the rustproof oil is removed, proper amount of
lubricant should be injected onto various sliding surfaces. Hen move the sliding surfaces for
final cleansing and lubrication.
6
、
Do not remove the oil brushes in the process of cleaning.
7
、
Do not use gasoline or any other inflammable oil cleanser.
C
、
Floor Space
Fig.54
Summary of Contents for LC-20VA
