Sharp HT-X1, Operation Manual

Page: 54 / 68

54
HT-X1
Adv
anced F
eatures
Changing the default setting of the amplifier (continued)
"
Speaker level setting
If sounds from the speakers are uneven, you can equalize them by
adjusting the speaker levels.
Notes:
!
The speaker level setting is only available for the front speakers
and subwoofer/amplifier unit when the surround is "STEREO" or
"VIRTUAL (SURROUND)".
!
If subwoofer/amplifier unit sound is distorted, lower the
subwoofer/amplifier unit level.
"
Test tone
You can check each speaker sound by a test tone. Readjust the vol-
ume set in "Speaker level setting".
Note:
The test tone is produced only from the front speakers and
subwoofer/amplifier unit when the surround is "STEREO" or "VIR-
TUAL (SURROUND)".
1
Press the SET UP AMP button.
2
Within 10 seconds, press the or
button to select "SP LEVEL",
and then press the ENTER button.
3
Within 10 seconds, press the or
button to select the desired
speaker.
The indicator of the selected speaker
flashes.
4
Within 10 seconds, press the or
button to adjust the level.
!
You can adjust the level at 1 dB in-
tervals.
!
To set the level of other speakers,
repeat the operation from step 3.
5
Press the RETURN button twice.
The setting is complete.
Speaker Delay
Amplifier Setup
Speaker Level
Test Tone
Select Enter Return ENTER
Front
Speaker Level
Select Change Return
L 0 dB
Center 0 dB
Front R 0 dB
Surround R 0 dB
Surround L 0 dB
Sub Woofer 0 dB
Front
Speaker Level
Select Change Return
L 0 dB
Center 0 dB
Front R 0 dB
Surround R +3 dB
Surround L 0 dB
Sub Woofer 0 dB
1
Press the SET UP AMP button.
2
Within 10 seconds, press the or
button to select "TONE", and
press the ENTER button.
The test tone will be heard from each speaker in order, at about
2-second intervals.
To adjust speaker levels
While the test tone is heard:
Adjust the level with the or button.
Press the or to select a speaker.
3
Press the RETURN button twice.
The setting is complete.
Speaker Delay
Amplifier Setup
Speaker Level
Test Tone
Select Enter Return
ENTER
Front
Test Tone
Select Change Return
L 0 dB
Center 0 dB
Front R 0 dB
Surround R +3 dB
Surround L 0 dB
Sub Woofer 0 dB