GX20
2 – 71
CONFIDENTIAL
Temperature
correction
TMPADJ
4nn
3nn
2nn
1nn
TMPADJ4nn
TMPADJ3nn
TMPADJ2nn
TMPADJ1nn
Battery side -nn ºC. (Not cumula-
tive subtraction)
Battery side +nn ºC. (Not cumula-
tive addition)
Camera side -nn ºC. (Not cumula-
tive subtraction)
Camera side +nn ºC. (Not cumula-
tive addition)
“nn”: To input difference from the
present temperature.
Cumulative addition is unavailable
for more than one transmission.
Correcting difference between the
ambient temperature and the tem-
perature read by the sensor. Com-
paring the ambient temperature
and the temperature read by the
sensor to transmit the corrected
value.
TMPADJ15: To raise temperature
by 5 °C.
TMPADJ25: To reduce tempera-
ture by 5 °C.
*
When the same commands are
transmitted several times, cor-
rected vales are not added.
IrDA Test
IRDA
1
2
3
4
5
6
OK
NG aa
NG NODATA
1: 2.4 kbps
2: 9.6 kbps
3: 19.2 kbps
4: 38.4 kbps
5: 57.6 kbps
6: 115.2 kbps
“OK” if “5A” is detected.
If values other than “5A” are
detected, they are returned.
Data cannot be received.
Provide the set in the IrDA jig
mode to the other end of the line to
perform the transmitting/receiving
test. When IRDA is transmitted, the
set in the IrDA jig mode receives
signals and returns “5A”. Detecting
“5A”, the tested set returns “OK” to
the personal computer.
When values are other than “5A”,
“NG aa” is returned. If data cannot
be received, NG NODATA is
returned. *3
IrDA Jig
Mode
IRDACH
1
2
3
4
5
6
OK
1: 2.4 kbps
2: 9.6 kbps
3: 19.2 kbps
4: 38.4 kbps
5: 57.6 kbps
6: 115.2 kbps
IrDA Jig mode entered.
After that commands are rejected.
When IRDACH5 is transmitted,
using the command to set the IrDA
jig mode, the jig mode starts.
Reset, or disconnect the power
from the set, to release the jig
mode. *3
Vibrator Test
VIB
1
0
VIBn
Asynchronous drive. (Always ON)
Stop.
Checking vibrator operation.
When VIB1 is transmitted, the
vibrator operates continuously;
when VIB2 is transmitted, it stops
operation.
Melody Test
MELO
2
1
0
MELOn
1 kHz playback from Jack.
1 kHz playback from SP.
Stop.
Checking melody playback. *4
Memory test
(SRAM)
MEMCHK1
00000
00000
07FF
FE5
MEMCHK1 OK
MEMCHK1 NG 0000
0000dddd
Addresses (00000000 to
0007FFFE) are checked.
For NG, the address “00000000”
and the readout data “dddd” are
returned.
(dddd: Production Process No)
Checking read/write of 4Mbit
SRAM.
Memory test
(PSRAM)
MEMCHK2
00370
00000
3703
FE5
MEMCHK2 OK
MEMCHK2 NG 0037
0000dddd
Addresses (00370000 to 003
703FE) are checked.
For NG, the address “00370000”
and the readout data “dddd” are
returned. (dddd: Production Pro-
cess No)
Checking read/write of 16 Mbit.
Smartcombo RAM.
POWER OFF
PWRDOWN
None
OK
POWER OFF
POWER OFF when PWRDOWN is
transmitted.
[Note]
In the test mode clock setting is reset; after finishing the test, if necessary, reset the current
time by selecting [Date&Time] in [Settings] in the normal mode.
Item
Incoming Serial Signal
Outgoing Serial Signal
Contents
Test Method
Command
n
Response
