manualshive.com logo in svg

Sharp GX10i, Service Manual

Share
Download
Sharp GX10i Service Manual Download Page 32

2 – 28

GX10i

CONFIDENTIAL

3.3.6 Matters to be attended to the Installation /Uninstallation

• To install the upgrading tool to the PC that already has one, uninstall the preloaded tool first, and then install the program

again.

• If you are operating the upgrading tool on Windows 98, 98SE or Me operation system, a message may ask you to restart

the operation system during the installation. In this case, do so according to the instruction. Even if such a massage does
not appear, restart your operation system after the installation is completed.

Note) If you are trying to activate the upgrading tool on Windows 98 without restarting it, the following message may appear.

In this case, you need to restart the operation system to operate the upgrading tool properly.

Figure 55

Attachment 3      Reset Tool for the phone code

<Description>

Reset the phone code to “0000”.

<Operation>

(1) Connect the Reset tool to the cable.

(2) Execute “PWDinit.exe”.

(3) Press the power key to access the idle mode. (“InsertSIM” is displayed.)

(4) Press “Set to Default”.

Figure 56

(5) Enter “2968” and press “OK”.

Figure 57

Summary of Contents for GX10i



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands