Optional Settings
149
6. O
p
ti
on
Setti
ngs
Note
: This setting will only appear if your dealer has installed the
paper cassette option and Option Setting 33 (Seperate Mode) is turned
off.
♦
Initial setting: 1
Setting 17: RETRANSMISSION TIMES
This sets the number of times the fax will reattempt a memory
transmission which has been interrupted by a line error or power
failure. Enter any 2-digit number from
01
to
14
, or enter
00
to turn off
the function.
♦
Initial setting: 10
Setting 18: RETRANSMISSION INTERVAL
You can select the number of minutes the fax waits between each
memory retransmission attempt. Enter
01
for 1 minute,
02
for 2
minutes, etc., up to a maximum of 15 minutes. If you do not want the
fax to wait between attempts, enter
00
.
♦
Initial setting: 02
Setting 19: HEATER MODE
To conserve power, you can turn off the laser printer heater in your fax
machine. When this is done, the heater will turn on automatically
when you receive a document (there will be a slight delay before
printing while the heater warms up) and turn off when printing is
completed. Press
2
to turn off the heater, or
1
to keep it on.
♦
Initial setting: 2
Setting 20: ANTI-JUNK FAX
Press
1
to block reception from fax numbers entered in the Anti Junk
Fax List. Press
2
to allow reception from all numbers.
♦
Initial setting: 2
all-FO4700.book Page 149 Tuesday, November 28, 2000 2:07 PM
