Sharp FO-4650 Operation Manual Download Page 56

Page: 56 / 188

Sending a Fax by Automatic Dialing

SEARCH DIAL

Load the document(s).

SEND READY will appear in the
display.

•

Set the resolution and/or contrast if
desired.

Enter the first letter of the stored
name by pressing the appropriate
letter entry key.

•

If you don’t remember the first
letter, go to Step 4 (you will scroll
through the list from the
beginning).

Press either arrow key to scroll
through the names. Stop when the
desired name appears in the display.

•

If no numbers have been stored
under the entered letter or you have
reached the end of the list, NOT
FOUND will appear.

Example: A

RESOLUTION

CONTRAST

Press the

SEARCH DIAL

key (flip

up the Rapid Key overlay).

all-FO4700.book Page 54 Tuesday, November 28, 2000 2:07 PM

Summary of Contents for FO-4650





























































































































































































Search results

Summary of Contents for FO-4650

Reviews:

Related manuals for FO-4650

Brands by name

Popular brands

Sharp FO-4650, Operation Manual

Search results

Summary of Contents for FO-4650

Reviews:

Related manuals for FO-4650

Brands by name

Popular brands