Sharp FO-1460, Service Manual

Page: 9 / 108

4
Replace the paper cover on the paper tray and then push the
paper release plate back down.
•
Important: Be sure to replace the paper cover before you
push the paper release plate down.
5
Your fax has been set at the factory to scale the size of the printed
image to letter size paper. If you have loaded legal size paper,
you must change this setting to legal. Press the "FUNCTION" key,
the "6" key, the "
" key twice, and then press "1" to select letter,
or "2" to select legal. When finished, press the STOP key. Be sure
to change this setting every time you change the paper size.
6
Your fax has been set at the factory to print on regular paper. If
you have loaded high quality thermal transfer paper, you must
change this setting to "HIGH QUALITY". Press the "FUNCTION"
key, the "6" key, the "
" key three times, and then press "1" to
select regular, or "2" to select high quality paper. When finished,
press the STOP key. Be sure to change this setting again if you
change back to regular paper.
5. Clearing paper jams
If a document doesn’t feed properly during transmission or copying,
or DOCUMENT JAMMED appears in the display, first try pressing the
START key. If the document doesn’t feed out, open the operation
panel (grasp the front edge at the "PANEL RELEASE" mark and pull
up) and pull it out gently.
1
Press the release marked OPEN and open the print compartment
cover.
•
Caution! The printing head (the strip of metal on the underside of
the frame) applies heat to the printing film. It may be hot if a
document has just been printed.
2
Remove the imaging film from the printing compartment and set it
on a sheet of paper.
3
Gently pull the jammed paper out of the printing compartment.
LEGAL
LETTER
FUNCTION
6
1 2
Letter
Legal
STOP
or
FUNCTION
6
1
2
Regular
High quality
STOP
or
UX-510U/UX-510C/UX-500U
UX-500C/FO-1460U
1 – 7