background image

5

Thinner

CLEANING THE UNIT

When cleaning the unit, use a dampened cloth with lukewarm
water.
Never clean or spray with a liquid such as insecticide, ben-
zine, thinner or oil.

MAINTENANCE

CLEANING  THE MOTOR-PRE FILTER

Benzine

The filter should be cleaned at times or when it becomes visibly soiled.

Unplug the vacuum cleaner from an electrical outlet before maintenance.

Pull the filter holder
upward.

Remove the filter
from filter holder.

1

2

Rinse the filter in lukewarm water and dry
the filter completely.

3

5

Put the filter holder
back .

HOW TO REPLACE THE HEPA FILTER

Remove the exhaust cover.

Press the button of exhaust cover, and
remove the exhaust cover.

1

2

Replace the HEPA Filter.

Put the dust bag
back.

6

Always operate the vacuum cleaner with filter installed.
Otherwise, suction power may be decreased or the motor may be damaged.

Pull out the HEPA filter from the body.

Exhaust cover

Buttton

HEPA filter

Filter

Filter holder

Do not use a washing
machine to rinse the fil-
ter.
Do not use a hair dryer to
dry it.

Filter holder

Filter

Filter holder

4

Put the rinsed fil-
ter back into the fil-
ter holder.

Filter

Filter holder

Summary of Contents for EC-CB18







Reviews: