6
BEFORE ASKING FOR SERVICE
SHARP CORPORATION
If you experience any difficulties with your vacuum cleaner, use this Troubleshooting Chart first before
requesting service.
NOTE: Always remember to have the vacuum cleaner turned OFF and disconnect the plug from an electrical
outlet before working on the vacuum cleaner.
Please request service if the problem still persists or if the problem is not defined in the
Troubleshooting Chart.
Problem
Check
Countermeasure
TROUBLESHOOTING CHART
The cord is not rewind.
Is the cord entangled?
Pull the cord out a little and press the cord
rewind button again.
Make sure the vacuum cleaner is plugged
in and that outlet is working.
Make sure to plug into an outlet.
Plug into another outlet.
The motor does not
rotate.
Check to see if the cloth bag is filled
with dust.
Check to see if the suction hose, exten-
sion pipes or floor nozzle is clogged.
Dispose dust.
The unit does not func-
tion or decrease in
suction power.
Remove any foreign object that may have
become jammed in the floor nozzle,hose or
pipe.
R
WARNING
This vacuum cleaner contains a motor protection system to maximize the motor life. It is designed to
shut off to avoid overheating in case of a blockage or clogged filter. If the protection device is activated,
the vacuum cleaner stops without turning off the switch. If this happens, turn off and unplug the
vacuum cleaner.
Please empty the dust bag and clean the motor pre-filter.
After approximately 1 hour, the motor will have cooled and the vacuum cleaner will be ready to use.
Operating this vacuum cleaner with clogged or dirty filter may cause the vacuum cleaner to overheat.
Please clean the motor pre-filter and empty the dust bag regularly.
1
9HMSHRP20XS89 06H
Printed in China
CN
