4
1
2
1
2
3
HOW TO DISPOSE DUST
Note
The case cover cannot be closed without the dust bag.
Do not press the case cover hardly.
To avoid damaging the motor, never use a broken dust bag, or never operate
the vacuum cleaner without the dust bag.
To keep the suction power highly efficient and lengthen a life of motor, please
dispose dust frequently.
HOW TO SET THE DUST BAG
HOW TO EMPTY DUST
Open the case cover
as shown.
Before open the case cover, make
sure to take off the hose.
Pick the plate of
dust bag and lift it
up slowly from the
dust bag holder.
Pull out the dust stopper to dispose
dust.
After disposing dust, replace the dust
stopper properly.
Close the case cover until it clicks.
Dust stopper
Use genuine SHARP dust bags.
The vacuum cleaner is equipped with the dust indicator(change to red colour).
When the dust indicator shows that the dust bag is full, you should dispose dust.
If the dust bag is not full, but the indicator shows that it is full, the suction
nozzle,hose, or extension pipe could be blocked. Then, unblock the obstacle.
If the vacuum cleaner takes in excessive amount of fiber (thread,cottony materical
etc.), the indicator may not change to red colour even if the dust bag is full.
Case cover
Insert the plate of dust bag to the dust
bag holder properly.
•If the dust stopper is not inserted properly, it
might become the cause of trouble.
Dust indicator
Plate of dust bag
Dust bag holder
Dust bag holder
Plate of dust bag
Case cover
