EN-19
EN-4
EN-7
EN-6
Terminal
EN-15 and 16
Back side
STORAGE
Tips
Replacing Battery
Storing Product
Precautions for Details
When the product is not
used for a long time.
Care is needed when leaving the product standing leaning against a wall, as the
product may fall.
Store the product in the condition described in the diagram below when not using
the product for a long period of time.
Store the product by hooking the holder section on furniture or the like, in a gap between a furniture
and the wall, in the corner of the room or inside a closet where the product is unlikely to fall.
Care must be taken as the holder section may slide and leave pigment on the
contacted surface, depending on the type of the wall or furniture.
If the product cannot be easily secured by hooking due to slippery floor or furniture,
do not force the product to hook at a location but disassemble the product for
storage instead.
Verify that there is nothing in the vicinity of the product that can be damaged easily.
Pay particular attention to ensure no infant or pet is allowed to get near the product.
Holder
section
There may be cases where the floor surface is damaged when the
roller switch on the bottom side of the Suction head, wheels or
the Napped cushion is worn.
Wheel
Napped cushion
Napped cushion
Integrated with
Suction head
Integrated with
Rotary brush
cover
Roller
Switch
In the event the part becomes
worn it is necessary to replace it
with a new one.
Stop using the product and contact
your nearest service center
approved by SHARP.
The replacement of the part for the
is performed while the product
is left with Sharp.
Replacement part (Rotary brush
cover) is available for purchase.
Do not drag the charger (Risk of scratching on the floor
surface).
This product is for indoor use only.
Do not operate the product while the Dust cup assembly
has been removed.
Large dirt or a large amount of dirt suctioned at the same time.
Sharp objects (glass, razor blade and the like).
Liquid or moist dirt.
A large amount of sand.
(Risk of heating, ignition of fire or
electrocution.)
Furthermore, store the product in a
location where there is little humidity
or dust.
Do not transport or store the product
together with any metal object, such
as a needle, necklace or hair pin.
It is recommended that the power
plug of the charger be removed from
the power outlet.
The charger consumes about 0.5 W
of power while the power plug is
connected to the power outlet.
Removing the power plug when the
charger is not in use can keep down
wasteful power consumption.
Consider following precautions
when storing the battery.
Remove the battery from the base
unit and completely charge the
battery before storing.
Twines
Do not apply lubricant to the Rotary brush (Risk of
plastic parts cracking).
Do not hit the Suction head hard on the steps on the
floor surface or gaps in floor heights, as well as
furniture or wall (Risk of the floor surface becoming
scratched).
Clean respective filters when fine powder (plaster, cement,
chalk and the like) has been suctioned.
Do not suction any of the following types of items
(Risk of scratching of the product interiors and clogging of the
product, as well as product malfunction).
This cordless vacuum cleaner is intended for
household use and must not be used for commercial
applications. Furthermore, the product must not be
used for any purpose other than cleaning.
There are instances where the operation of the
product causes noise to appear on the screen of
television sets. There is no negative impact on
the television set when this occurs.
There is no malfunction if the the Charging lamp (red) on
the charger blinks slowly when charging in an
environment with a low temperature (about 5°C or lower)
or a high temperature (about 35°C or higher).
Charge the battery in an environment that is between
5°C to 35°C.
Recommended time for replacing
the battery.
When the Charging lamp (red) of the charger blinks slowly
whenever charging in an environment with room temperature of
between 5°C and 35°C.
When the operating time is extremely short even when the battery
has been charged.
We invite you to recycle the spent battery.
Information on handling of spent battery.
Insulate the terminal sections using plastic tape or the like that are available on the market.
Furthermore, do not disassemble the product.
The battery (lithium-ion battery) is a precious resource that can be recycled.
Bring in the spent battery to a store that accepts batteries for recycling, rather than disposing of
them as waste material.
Batteries are consumable products.The operating time
gradually becomes shorter as the battery deteriorates with
repeated use. Although the deterioration of batteries vary
depending on the condition of use or operating
environments, the battery should be replaced if any of the
following conditions apply.
CAUTION
EN-5
ENGLISH
清理濾網燈（紅色）
電池剩餘電力指示燈（綠色）
請清理垃圾，並去除濾網上的污垢與灰塵。
集塵筒組的濾網過髒。
主機過熱。
請於陰涼處放置片刻。
若繼續讓吸塵機運作，未將其冷卻，將觸發主機的過熱保護
功能，導致吸塵機暫時無法使用。
電池剩餘電力即將耗盡。
（電池剩餘電力已耗盡。）
敬請充電。
請用水清洗濾網。
集塵筒組的濾網阻塞。
延長電池使用壽命
的要訣
保養
地板吸頭、主機、附屬吸頭、
充電部位的接點（端子）
被線頭、橡皮筋、毛髮、寵物的毛等物質纏住時。
地板吸頭（旋轉刷）
主機、附屬吸頭、充電部位的接點（端子）
感覺已髒污時
CN-15
、
16
CN-13
、
14
CN-16
CN-4
CN-7
附屬吸頭
請先水洗後，再充分去除
水分。
使用清水或稀釋
過的中性清潔劑
清洗。
主機
以含有清水或稀釋的中性清潔劑的抹布
擦拭。請勿使用稀釋劑與揮發油類。
【否則將造成變質或變色】
注意！
主機、充電器、電池不可
水洗。
裝卸按鍵
要拆下各零件時，請以同時按住「裝卸按鍵」
的方式拆下。
以手提狀態使用時
主機指示燈的亮燈方式
透過指示燈告知使用者主機的狀況
清理濾網燈（紅色）
電池剩餘電力指示燈（綠色）
※
1
直接在電池電力完全耗盡的狀態下放置時，將
造成電池劣化。
在電池剩餘電力尚未完全耗盡前即充電的做法，
較能延長電池的使用壽命。
不論使用時間長短，清掃完畢後請務必充
電。
長期間不使用時的須知
電池的更換基準
充放電約
1,100
次
◆
依據反覆充放電的本公司基準進行試驗的情況。
電池的使用壽命會因使用條件與環境而改變。
指示燈的亮燈方式
異常狀況／通知內容
亮燈
※
2
快速閃爍
快速閃爍
閃爍
亮燈
電池剩餘電力充足。
電池剩餘電力過低。
自按下 停止運作的時間點起算約
5
秒鐘
清掃期間
自電池安裝至主機上的時間點起算約
5
秒鐘
吸頭被堵住時，即使濾網不髒，亦可能會亮燈。如遇此情況，請先按下 後，再讓吸塵機運作，
指示燈即會熄滅。（停止約10秒後燈光將熄滅）
電池剩餘電力指示燈的亮燈時機如下。（電池剩餘電力完全耗盡時，不會亮燈。）
1
2
CN-4
沿著旋轉刷的溝槽剪下。
（不可剪到刷毛的毛尖。）
使用除塵毛刷吸頭吸取附著在吸頭上的灰塵，
並將纏繞在 部位的毛髮與線頭剪下後，
以用力擰乾的濕布擦拭。
附著於窄小部位中的垃圾，
請使用細長型剪刀或鑷子等工具去除。
皮帶保護蓋
拆下旋轉刷用水清洗後，將水分徹底瀝乾，並放置於通風處
充分風乾後，再裝回主機。
不可將整個吸頭水洗。
水洗
髒污非常嚴重時
清除垃圾
將開關拉桿滑動至「OPEN」處，拆下皮帶保護蓋。
①
在將旋轉刷抬高的狀態下，將皮帶由齒輪上拆下，
並拆卸旋轉刷。
②
拆下
部位已磨損時，請停止使用，並確認
的內容後，洽詢客戶服務中心。
安全滾輪開關
車輪
緩衝毛墊
（左右各
3
處）
旋轉刷
皮帶保護蓋
開關拉桿
拆下皮帶
皮帶
齒輪
FILTER
FILTER
中文
CN-6
CN-17
EC-A1RHK_A4(W page imposition).indd 39-40
2018/12/06 14:27:03
