Sharp DV-HR300H Operation Manual Download Page 32

Page: 32 / 112

Checking the Channel,
Remaining Time of DVD
and Number of Titles

When

DVD

button on the front of the

Recorder is lit (DVD mode)

Press

ON SCREEN

(under the

cover) or

DVD

• Channel information is displayed.
• The channel information display will

automatically turn off in 5 seconds.

Press

ON SCREEN

(under the

cover) or

DVD

again

• The DVD information screen is

displayed.

Disc type, recording format, original title

playback/Play List playback indicators

Mode display
• Playback:
• Recording:

REC

• Stop:

Recording mode and remaining

(recordable) time
• “FINALIZED” indicator when a

finalized disc is played back.

Current title number/Total number of

titles
• Total number of titles (Stop mode)
• Title number currently played back

(Playback mode)

• Title number currently recorded

(Recording mode)

Current chapter number/Total number of

chapters
• Total number of chapters (Stop mode)
• Chapter number currently played

back (Playback mode)

• Chapter number currently recorded

(Recording mode)

Counter

Repeat Playback indicator

Press

ON SCREEN

(under the

cover) or

DVD

again.

• The screen changes to the counter

display.

Press

ON SCREEN

(under the

cover) or

DVD

again.

• Display is turned off.

Display Information

DVD-RW

I N AL

I G

REMAIN 0h49m

0 0 : 0 0 : 1 2

1 / 7
1 / 1

F I NE

0 0 : 0 0 : 2 6

DVD-RW

I N AL

I G

NOTE

• The DVD information screen (step

) will

automatically disappear in 1 minute.

• The counter display (step

) will not

disappear automatically. Press

ON SCREEN

(under the cover) or

DVD

to turn it off.

Switching Front Panel
Display

Turn the power on.

• Channel display (when watching TV)

• Counter display (during playback/

recording)

Press

DISPLAY

(under the cover).

• Remaining time display (when

watching TV)

• Current title number and chapter

number (during playback)

• Channel currently recorded (during

recording)

Press

DISPLAY

(under the

cover) again.

• The screen returns to the display in

step

VIDEO Plus+

NOTE

• Because of technical reasons the time counter

is rounding up or down during the time
counting process. Therefore small deviations
of the time display are normal.

Hour

Minute Second

Hour

Minute

Current title Current chapter

Front panel display

DV-HR350H/300H-026-033

2004.4.8, 10:37 AM

Summary of Contents for DV-HR300H

















































































































Search results

Summary of Contents for DV-HR300H

Reviews:

Related manuals for DV-HR300H

Brands by name

Popular brands

Sharp DV-HR300H, Operation Manual

Search results

Summary of Contents for DV-HR300H

Reviews:

Related manuals for DV-HR300H

Brands by name

Popular brands