manualshive.com logo in svg

Sharp CINSE4653DS51, Start Manual, Page: 44 / 60

Share
Download
Sharp CINSE4653DS51 Start Manual Download Page 44

42

MAINTENANCE

4

Insert the new toner cartridge.

Align the toner cartridge with the insert hole and push it in as 
shown.
Do not rotate the cartridge.

5

Push the cartridge in until it locks securely 
in place.

6

Close the front cover.

 

Caution

•

Do not throw a toner cartridge into a fire. Toner may fly and cause burns.

•

Store toner cartridges out of the reach of small children.

•

If a toner cartridge is stored on end, the toner may harden and become unusable. Always store toner cartridges on their 
side with the top side up.

•

If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality and 
performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.

• Keep the used toner cartridge in a plastic bag (do not discard it). Your service technician will collect the used toner 

cartridge.

• To view the approximate amount of toner remaining, continually touch the [COPY] key during printing or when the machine 

is idle. The percentage of toner remaining will appear in the display while the key is touched. When the percentage falls to 
"25-0%", obtain a new toner cartridge and keep it ready for replacement.

• Depending on your conditions of use, the colour may become faint or the image blurred.

Summary of Contents for CINSE4653DS51





























































Reviews:

No comments