Sharp CINSE4653DS51, Start Manual, Page: 21 / 60

19
PLACING ORIGINALS
The automatic document feeder can be used to automatically scan many originals at once. This saves you the trouble of
manually feeding each original.
For originals that cannot be scanned using the automatic document feeder, such as a book or a document with notes
attached, use the document glass.
Using the automatic document feeder
When using the automatic document feeder, place the originals in the document feeder tray.
Make sure an original has not been placed on the document glass.
Using the document glass
Take care that your fingers are not pinched when closing the automatic document feeder.
After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be
copied black, causing excessive use of toner.
Pla c e the originals fa c e up with the edges
aligned evenly.
The indi c ator line indi c ates approximately
how many originals c an be pla c ed. The pla c ed
originals must not be higher than this line.
Adjust the original guides
to the width of the originals.
Pla c e the original
fa c e down.
Pla c e the original fa c e down.
Align the top left c orner of the
original with the tip of the
mark in the far left
c orner of the
glass.
To pla c e a thi c k original su c h as
a book, push up the far edge of
the automati
c do c ument feeder
and then c lose the automati c
do c ument feeder slowly.