Sharp CD-DVD500H Operation Manual Download Page 64

Page: 64 / 76

ENGLISH

CD-DVD500H

You can record 3 CDs continuously.

Press the ON/STAND-BY button to turn the power on.

Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be performed.

Press the DVD/CD button and load the desired disc.

Press one of the

1 -

3 buttons to select the disc to be re-

corded first.

Press the REC PAUSE

(

) button.

Recording will be paused.

Press the

button to start recording.

CD playback will start approximately 7 seconds after the tape starts.
Recording is started from the selected CD. When the playback of the last
disc is finished or the end of the tape is reached, the CD and the cassette will
stop automatically.

To perform programmed recording:
1. Programme discs and tracks (page 52).
2. Press the REC PAUSE

(

) button.

3. Press the

button.

To stop recording:
Press the

■

button.

The CD and tape will stop.

Note:
If you load a DVD disc(s), it will be skipped.

Recording from a CD (CDs)

ape recording

–

Recording from a CD (CDs)

–

Summary of Contents for CD-DVD500H













































































Search results

Summary of Contents for CD-DVD500H

Reviews:

Related manuals for CD-DVD500H

Brands by name

Popular brands

Sharp CD-DVD500H, Operation Manual

Search results

Summary of Contents for CD-DVD500H

Reviews:

Related manuals for CD-DVD500H

Brands by name

Popular brands