E-6
■
Line In connection
Connect to the TV using an audio cable.
Main unit
To LINE input
jacks
Audio signal
Audio cable
(commercially
available)
To audio output
jacks
TV
To select Line In function:
●
On main unit: Press INPUT button repeatedly until Line
In is displayed.
●
On remote control: Press AUDIO/LINE (INPUT) button
repeatedly until Line In is displayed.
■
Antenna connection
Supplied FM antenna:
Connect to the FM 75 ohms jack and position it where
reception is best.
External FM antenna:
Use an external FM antenna (75 ohms coaxial cable) for
better reception. Disconnect the supplied FM antenna wire
before use.
Supplied AM loop antenna:
Connect to the AM terminal and position it where reception
is best. Place it on a shelf, etc., or attach it to a stand or a
wall with screws (not supplied).
■
Bluetooth
standby mode
●
The first time the unit is plugged in, it will enter the
Bluetooth
standby mode. “Bluetooth Stby” appears on
the display.
●
To cancel the
Bluetooth
standby mode, press the ECO
button (remote control) during power standby mode.
The unit will enter the low power consumption mode.
●
To return to the
Bluetooth
standby mode, press the ECO
button again.
■
AC power connection
After all connections have been made correctly, plug the
AC power cord into the AC outlet.
Note:
Unplug the AC power cord from the AC outlet if the unit will
not be in use for a prolonged period of time.
Make sure to unplug the AC power cord before making any connections.
Installing the supplied
FM antenna
AC outlet
(AC 100 - 240 V ~
50/60 Hz)
System connection
CAUTION:
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
AM loop antenna
Installing the AM loop antenna
< Attaching to the wall >
< Assembling >
wall
Screws (not supplied)
External FM antenna
for better reception (not
supplied)
