E-10
■
Listening to the sound
Check that:
●
The source device
Bluetooth
functionality is ON.
●
Pairing of this unit and the source device is completed.
●
Unit is in connected mode.
1
Press the (ON/STANDBY) button to turn the power on.
2
Press the button on the main unit or
BLUETOOTH
button
on the remote control to select Bluetooth function.
3
Start the
Bluetooth
connection from the
Bluetooth
audio source
device.
4
Press the
BLUETOOTH
/ button.
Notes:
●
If the source device has an extra bass function or equalizer
function, set them to off to avoid sound distortion.
Notes:
●
Make the
Bluetooth
connection again if the source device is not
turned on, or its
Bluetooth
functionality is off or is in sleep mode.
●
The volume of this unit may not be controlled as intended de-
pending on the device.
Bluetooth
operation buttons
Main unit
Remote
control
Operation
Press the button to play or
pause.
Press the button to skip to next
track.
Press and hold to fast forward.
Press the button to skip to
previous track.
Press and hold to fast reverse.
■
To disconnect the
Bluetooth
device
Perform any of the followings.
–
Press PAIRING button until “Disconnected” appears on the display.
–
Disconnect or turn off the
Bluetooth
connection on the audio source
device. Refer the operating manual supplied with the device.
–
Turn off this unit.
■
Auto power on
During
Bluetooth
standby mode, the unit will automatically
power on when the
Bluetooth
connection is set up between
the main unit and your device.
Note:
This function is not applicable during
Bluetooth
standby
mode off.
■
Link to
Bluetooth
headphone
You can connect a set of
Bluetooth
headphones to this unit.
Before making the connection, check that:
●
The
Bluetooth
headphone to be connected is in pairing
mode and within range.
1
Select a desired function to listen to, except for
Blue-
tooth
function.
2
Press and hold the HEADPHONE LINK button on the
remote control until “Headphone Link” appears on the
display.
3
Press ENTER button. “Searching” appears on the dis-
play.
4
After finish searching, the nearby devices’ names will
be shown on the display. Press or to select the
desired device and then press ENTER button. “Con-
nected” appears on the display and Headphone Link
LED (green) lights up.
●
If your device does not appear on the list, do the
following:
- Make sure the
Bluetooth
headphone is still in
pairing mode. Refer to the manual supplied with
it.
- Press button.
- Repeat steps 2 - 4.
Notes:
●
Connection to
Bluetooth
headphone is valid in all
function except
Bluetooth
.
●
Bluetooth
headphone connection will be terminated in
Bluetooth
function.
●
When connected with Headphone Link, speaker
output is muted.
●
Volume can be controlled on both main unit and the
connected
Bluetooth
headphone separately.
To disconnect the
Bluetooth
headphone:
Turn off the
Bluetooth
mode on the connected
Bluetooth
headphone. Refer to the manual supplied with it.
“Disconnected” appears and Headphone Link LED (green)
lights off.
To re-link with the previous headphone device:
The device must be in pairing mode and within range.
1
Press the HEADPHONE LINK button. “Headphone
Link” will be blinking depending on the last connection.
2
Within 5 seconds press the ENTER button. “Linking”
will be displayed. “Connected” appears if re-link pro-
cess is successful.
Note:
If “Not found” appears, repeat from step 1. Make sure that
the device to be connected is within range and in pairing
mode.
Listening to
Bluetooth
enabled devices (continued)