6
* This oven is preset with the INFORMATION GUIDE ON.
To assist you in operating your oven useful information will appear on the display.
In this manual, the display information guide is abbreviated.
* When you become familiar with your oven, the information guide can be turned off. Check page 21.
BEFORE OPERATING
Step
1
Getting Started
Press the STOP/CLEAR pad once to:
1.Stop the oven temporarily during cooking.
2.Clear if you make a mistake during programming.
3.Clear the message on the display after cooking.
Press the STOP/CLEAR pad twice.
Stop/Clear
To Cancel a Programme During Cooking
2
Step
1
* To enter the present time of day 11:34 (AM or PM).
Clock Setting
3
2
This is a 12 hour clock. If you attempt to enter an incorrect clock time (Eg. 13:45) ERROR will appear in the
display. Press the STOP/CLEAR pad and re-enter the time of day (Eg. 1:45).
If you wish to know the time of day during the cooking or timer mode, press the CLOCK pad. As long as your
finger is pressed the CLOCK pad, the time of day will be displayed.
Procedure
Pad Order
Display
Plug the oven into a power point and switch
on the power.
Ensure the oven door is closed.
SHARP, MICRO-WAVE,
OVEN will be displayed re-
peatedly.
Press the STOP/CLEAR pad so that the
oven beeps.
Only the dots will remain.
Procedure
Pad Order
Display
Press the CLOCK pad.
(operation guide off:
)
The dots (:) will flash on and
off.
Enter the correct time of day by press-
ing the numbers in sequence.
Press the CLOCK pad again.
STOP
CLEAR
CLOCK
CLOCK
