manualshive.com logo in svg

Sharp AR-M208, Operation Manual, Page: 59 / 128

Share
Download
Sharp AR-M208 Operation Manual Download Page 59

57

3

S

P

E

C

IAL FUNCTIONS

2 IN 1 OR 4 IN 1

The 2 in 1 or 4 in 1 feature is used to copy 2 or 4 originals, collectively in a specified order, onto one
sheet.

●

These features cannot be used with the dual page copying, XY zoom, erase or margin shift features.

●

Copies can be made with or without the border lines.

●

The order of originals which will be arranged on the copies can be selected. There are two patterns of
layout for 2 in 1 copying and four patterns of layout for 4 in 1 copying.

●

Non-standard size paper cannot be used with the 2 in 1 or 4 in 1 feature.

●

If this feature is set, the copy ratio will be automatically set and cannot be changed manually.

●

The 2 in 1 or 4 in 1 feature cannot be set for interrupt copying. While 2 in 1 or 4 in 1 is being set,
interrupt will not function.

1

Place an original on the platen glass or in the document feeder tray.

2

Use the PAPER SELECT key to select the paper tray with the desired
paper size.

4 in 1 copying

2 in 1 copying

Pattern

Pattern

Pattern

Pattern

Pattern

Pattern

Pattern

Pattern

Document feeder tray

Ar-M208_sec.book  57 

ページ

  

２００２年６月１３日　木曜日　午後２時３７分

Summary of Contents for AR-M208

































































































































Reviews:

No comments