manualshive.com logo in svg

Sharp AR-M208, Operation Manual, Page: 124 / 128

Share
Download
Sharp AR-M208 Operation Manual Download Page 124

122

5. FIRE -FIGHTING MEASURES

Extinguishing Media

:

water, CO

2

, foam and dry chemicals

Special Fire fighting Procedures :

None

Fire and Explosion Hazards

:

Like most finely divided organic powders, it may form an explosive mixture.

6. ACCIDENTAL RELEASE MEASURES

Personal Precautions

:

None

Environmental Precautions:

None

Methods for Cleaning Up

:

Wipe off with paper or cloth. DO not use vacuum cleaner when a large amount is
released. It, like most finely divided organic powders, is capable of creating a dust
explosion.

7. HANDLING AND STORAGE

Handling

Technical Measures

: None

Precautions

: None

Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity of toner or during

long term exposure, as with any non-toxic dust. Try not to disperse the particles.

Storage

Technical Measures

: None

Storage Conditions

: Keep container closed and Store in a cool and dry place.

Keep out of the reach of children.

Incompatible Products : None

8. EXPOSURE CONTROL/PERSONAL PROTECTION

Engineering Measures

Ventilation

: None required with intended use.

Exposure limit values

OSHA-PEL (USA)

: 15m

g

/m

3

 (Total Dust) , 5m

g

/m

3

 (Respirable Dust)

ACGIH-TLV (USA)

: 10m

g

/m

3

 (Total Dust) , 3m

g

/m

3

 (Respirable Dust)

Personal Protective Equipment

Respiratory Protection

: None required when used as intended in Sharp equipment.

Hand Protection

: None required when used as intended in Sharp equipment.

Eye Protection

: None required when used as intended in Sharp equipment.

Skin Protection

: None required when used as intended in Sharp equipment.

Other Protective equipment : Use of a dust mask and goggles are recommended when handling a large

quantity of toner or during long term exposure, as with any non-toxic dust.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance

Physical State: Solid             Form: Powder                Color: Black             Odor: odorless

Ph

:

Not applicable

Boiling/Melting Point :

Not applicable

Flash Point (˚C )

:

Not applicable

Explosion Properties :

No data

Density (

g

/cm

3

)

:

7.3 (bulk density : 2.0)

Solubility in water

:

Negligible

Ar-M208_sec.book  122 

ページ

  

２００２年６月１３日　木曜日　午後２時３７分

Summary of Contents for AR-M208

































































































































Reviews:

No comments