Sharp AR-M208 Operation Manual Download Page 29

Page: 29 / 128

COPYING FROM THE RSPF

KING COP

Set the originals face up in the document feeder tray.

●

The original size will be indicated in the display, and the paper tray with the
corresponding paper size will be automatically selected.

★

KEY OPERATOR

The auto paper select function can be disabled using a key operator

program. If this function has been disabled, use the PAPER SELECT key to select the
desired paper tray. See page 15 of the KEY OPERATOR'S GUIDE.

●

To copy onto a different size paper, use the PAPER SELECT key to make the selection.

Ensure that the one-sided to one-sided copying mode is selected.

●

When no icon indicating a 2-sided copy mode is displayed, the one-sided to one-sided
copying mode is selected.

Set the number of copies and press the START (

) key.

●

Press the CLEAR (C) key to stop copying in the middle of a run.

Ready to copy.

100%

AUTO

8 11

Ar-M208_sec.book 27

ページ

２００２年６月１３日　木曜日　午後２時３７分

Summary of Contents for AR-M208

































































































































Search results

Summary of Contents for AR-M208

Reviews:

Sharp AR-M208, Operation Manual, Page: 29 / 128

Search results

Summary of Contents for AR-M208

Reviews: