Sharp AR-M161, Operation Manual

Page: 61 / 108

59
COPY FUNCTIONS
4
TWO-SIDED COPIES OF TWO-SIDED ORIGINALS
(ONLY WHEN USING THE RSPF)
• Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"
and 8-1/2" x 11"R.
• Automatic two-sided copying is not possible when the bypass tray is used.
• This copy function cannot be used in combination with dual page copy.
1
Make sure that an original does not
remain on the document glass, and
then adjust the original guides to the
width of your originals and place the
originals face up in the document
feeder tray.
2
Press the [2-SIDED COPY] key.
The duplex mode selection
screen appears.
3
Select "2 to 2" with the [ ] or [ ] key,
or with the [2-SIDED COPY] key.
4
Press the [OK] key.
You will return to the base
screen.
5
Set the number of copies and press
the [START] key (
).
To stop copying in the middle of
a run, press the [C] key.
TO
GE OUTPUT
2-SIDED
COPY
SPECIAL FUNCTI
MAT
CAST
ORIGINAL SIZE DUPLEX SCAN
COPY MODE
1 to 1
1 to 2
2 to 2
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
COPY MODE
1 to 1
1 to 2
2 to 2
Do not touch an original (A) that is on the
reversing tray. Doing so may cause a
misfeed.
GHI
OK BACK
WXYZ
Note
(A)
Pegasus-E_Copy_Ex.book 59 ページ ２００４年９月２３日 木曜日 午前１１時４１分