Sharp AR-M161, Operation Manual

Page: 60 / 108

58
COPY FUNCTIONS
Copying from the document glass
1
Place the original for the front side of
the copy on the document glass, and
close the SPF.
2
Press the [2-SIDED COPY] key.
The duplex mode selection
screen appears.
3
Select "1 to 2" with the [ ] or [ ] key,
or with the [2-SIDED COPY] key.
4
If you wish to have the orientation of
the image on the back of the copy
paper be opposite the orientation of
the image on the front, set "BINDING
CHANGE" to "ON" with the [
] or [ ]
key.
5
Press the [OK] key.
You will return to the base
screen.
6
Make sure that the desired paper tray
is selected.
7
Set the number of copies and press
the [START] key (
).
8
Remove the first original and then
place the original for the back side of
the copy on the document glass.
Close the SPF and press the [START]
key (
).
• The copy will be delivered to the centre tray.
• To cancel two-sided copying, press the [C] key.
• To cancel two-sided (duplex) copy mode, press the
[2-SIDED COPY] key to select "1 to 1" and then
press the [OK] key.
• When making two-sided copies of an odd number of
originals, touch the [READ-END] key ( ) after
scanning the last original.
TO
GE OUTPUT
2-SIDED
COPY
SPECIAL FUNCTI
MAT
CAST
ORIGINAL SIZE DUPLEX SCAN
COPY MODE
1 to 1
1 to 2
2 to 2
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
COPY MODE
1 to 1
1 to 2
2 to 2
BINDING CHANGE
OFF
COPY MODE
1 to 1
1 to 2
2 to 2
BINDING CHANGE
ON
GHI
OK BACK
WXYZ
WXYZ
@.-_
READ-END
Pegasus-E_Copy_Ex.book 58 ページ ２００４年９月２３日 木曜日 午前１１時４１分