Sharp AR-FX8, Operation Manual

Page: 38 / 104

3-8
FAXING THE FRONT AND BACK SIDES OF A
CARD ON ONE SHEET OF PAPER (CARD SHOT)
When faxing a card, this function allows you to combine the front and back sides on a single sheet of paper. To use
this function, the original must be scanned on the document glass.
USING CARD SHOT
1 In fax mode, touch the [SPECIAL MODES]
key.
If the address book screen
appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 1-5).
2 Touch the [CARD SHOT] key.
The card shot screen
appears.
3 Enter the X dimension (width) and Y
dimension (length) of the original with the
keys.
●
X (width) is initially selected. Enter X and then
touch the Y (
) key to enter Y.
●
To return the X and Y values to the initial settings
configured in the key operator programs, touch the
[SIZE RESET] key. ( "CARD SHOT SETTINGS" on
page 14 of key operator's guide)
●
To have the images enlarged by a suitable ratio
based on the entered original size so that the front
and back sides fit into a 210 mm x 420 mm or
8-1/2"x16-34/64" area, touch the [FIT TO SEND
SIZE] key.
●
To cancel the card shot function, touch the
[CANCEL] key.
The front and back of the card
are printed on one sheet of
paper.
Front of card
Original
Transmission using the "card
shot" special function
Back of card
CARD SHOT
Your machine The other machine
Transmission to
other machine
NOTE
Only 210 mm or 8-1/2" width can be used for the transmitted paper size. A ratio cannot be specified and the image
cannot be rotated when using this function.
TO RECEPTION
MEMORY:100%
QUICK FILE
ADDRESS REVIEW
SPECIAL MODES
FILE
SUB ADDRESS
MODE SWITCH
ERASE
DUAL PAGE
SCAN
2in1 CARD SHOT
SIZE RESET
CANCEL OK
FIT TO
SEND SIZE