Sharp AR-FX8, Operation Manual

Page: 17 / 104

1-9
1
STORING, DELETING, AND USING ORIGINAL SIZES
Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
fax that size of document.
●
To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key
on the screen.
STORING OR DELETING AN ORIGINAL SIZE
1 Touch the [ORIGINAL] key.
2 Touch the key under [SCAN SIZE].
3 Touch the [CUSTOM SIZE] key.
4 Touch the [STORE/DELETE] key.
5
Touch the original size key ( ) that
you wish to store or delete.
To store an original size,
touch a key that does not
show a size (
).
Keys that already have an
original size stored will show
the stored size (
).
To delete or change a
stored size, touch the key that shows the size that you
wish to delete or change.
●
If you are storing an original size, go to step 6.
●
If you are deleting an original size, go to step 8.
●
If you are changing an original size, go to step 8
and touch the [AMEND] key.
6 Enter the X (width) and Y (length) dimensions
of the original with the
keys.
X (width) is initially
selected.
Enter X and then touch
the (
) key to enter Y.
A width of 64 to 432 mm
(2-1/2 to 17 inch) can be
entered in X, and a
length of 64 to 297 mm (2-1/2 to 11-5/8 inch) can
be entered in Y.
7 Touch the [OK] key.
The original size entered in step 6 is stored in the
key selected in step 5.
To exit, touch the [ORIGINAL] key.
8
When you touch a key that shows an
original size in step 5, a message screen
appears that contains the keys [CANCEL],
[DELETE], and [AMEND].
●
To cancel the procedure, touch the [CANCEL] key.
●
To delete the selected original size, touch the
[DELETE] key.
●
To change the original size stored in the key, touch
the [AMEND] key. The screen of step 6 will appear
to let you change the size.
9
To exit, touch the [ORIGINAL] key.
USING A STORED ORIGINAL SIZE
1
Follow steps 1 to 3 of "STORING OR
DELETING AN ORIGINAL SIZE".
2 Touch the original size key that you wish
to use.
3 Touch the [OK] key.
The stored original size is called up.
AUTO A4
ORIGINAL
STANDARD
RESOLUTION
100%
SCAN SIZE
AUTO A4
2-SIDED
BOOKLET 2-S
TAB
CUSTOM
SIZE
STANDARD SI
MANUAL
B5R
B5
5R
RECALL
STORE/DELETE
RECALL
STORE/DELETE
X68 Y78
X68 Y78
CANCEL OK
420
297
(64 432)
mm
RECALL
Y
X
A
X
Y
STORE/DELETE
(64 297)
mm
RECALL STORE/DELETE
X68 Y78