Sharp AR-FX8, Operation Manual

Page: 15 / 104

1-7
1
LOADING A DOCUMENT
A document can be loaded in the automatic document feeder or on the document glass. Use the automatic document
feeder when faxing a large number of sheet originals. Use the document glass to fax originals that cannot be scanned
using the automatic document feeder such as thick or thin sheet originals or bound originals such as books.
USING THE AUTOMATIC DOCUMENT FEEDER
1 Lift the document glass cover and make
sure a document is not placed on the
document glass. Gently close the cover.
2 Adjust the document guides on the automatic
document feeder to the width of the document.
3 Align the edges of the document pages
and then insert the stack in the document
feeder so that the first page is face up.
Insert the stack into the
automatic document
feeder until it stops. The
stack should not be higher
than the indicator line
(maximum 150 pages, for
A4 (8-1/2"x11") 80
g
/m
2
(20lbs)).
USING THE DOCUMENT GLASS
1 Open the document glass cover, and place
the document face down on the document
glass. Gently close the cover. Regardless of the size of the original, place the
original in the far left corner of the document glass.
(Align the upper left-hand corner of the original with
the tip of the mark.)
NOTE
Do not place any objects under the original size
detector plate. Closing the document glass cover
with an object underneath may damage the original
size detector plate and prevent correct detection of
the document size.
Original size detector
Document glass scale
mark
Document glass scale
mark
A4
A5
B5
A3
A4R
B5R
B4