37
GENERAL
INFORMA
TION
Setting the user programs
1
Press and hold the light (
) key for more than 5 seconds
until all the alarm indicators (
,
,
,
, and
)
blink and “– –” appears in the copy quantity display.
2
Enter a program number using the numeric keys.
●
The selected program number will blink in the copy quantity display.
●
If a mistake is made in steps 2 to 4, press the CLEAR (
) key. The
copier will return to step 2.
●
The program numbers are shown in the table below.
For example, to change the setting of the auto power shut-off timer,
press key 3.
Program name
Program No.
Auto clear time
1
Preheat mode
2
Auto power shut-off timer
3
Stream feeding mode
4
Auto power shut-off setting
5
Border line for 2 in 1 or 4 in 1
6
Rotation copy
7
Auto paper select mode
8
Auto tray switching
9
Auditing mode
10
Account number entry
11
Account number change
12
Account number deletion
13
Number of copies per account
14
Resetting account
15
Erase width adjustment
16
Layout in 2 in 1 copy
17
Layout in 4 in 1 copy
18
Offset of paper output tray
19
3
Press the START key.
●
For programs 1 to 9 and 16 to 19, the entered program number will be
steadily lit on the left side of the copy quantity display and the currently
selected parameter number for the program will blink on the right side.
●
For programs 10 to 15 (programs for auditing accounts), the display
varies with the program number. See page 39 for setting programs 10
to 15.
USER PROGRAMS
User
programs
For operation of these programs after
step 3, see page 39.
Summary of Contents for AR-160
Page 79: ......