Sharp AR-160, Operation Manual

Page: 31 / 82

29
S
T
A
T
U
S
IN
D
IC
A
T
O
R
S
1
Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.
2
Push gently on both sides of the front cover to open the
cover.
3
Lift the TD cartridge lock release lever and pull the
cartridge out until the green strap handle can be grasped
by the right hand. Lift the cartridge by the handle while
supporting it with the left hand at the green label position
to remove it.
4
Grasp the handle of the drum cartridge and gently pull
the cartridge out.
●
For disposal of the old drum cartridge, contact your dealer.
DRUM CARTRIDGE REPLACEMENT
The useful life of the drum cartridge is approximately 30,000 copies. When
the internal counter reaches approximately 29,000 copies, the drum
replacement required (
) indicator will light up indicating that replacement
of the drum cartridge will be needed soon. When the indicator begins to blink,
replace the drum cartridge by following the procedure given below.
Do not remove the protective cover on the drum portion
(black paper) of a new drum cartridge before use. The
cover protects the drum against external light.
●
For the procedure to find out how many more copies can be made before
the 30,000 mark is reached, see page 70, DRUM CARTRIDGE LIFE.
Drum cartridge replacement
TD cartridge lock
release lever
For best copying results, be sure to use only
SHARP products.
The package of SHARP drum cartridge has the
Genuine Supplies label.
GENUINE SUPPLIES