Sharp AR-160 Operation Manual Download

Page: 67 / 82

OPTIONAL

EQUIPMENT

Margin shift

The MARGIN SHIFT feature automatically shifts the text or image to the
right to increase the left margin by approximately 9 mm.

●

This feature cannot be used with the 2 in 1 or 4 in 1 feature.

Place the original on the original table and close the
platen cover.

●

If an optional single pass feeder (SPF) is installed, it can also be used
for this feature. Set the originals so that the margin side is positioned
at the left side.

Press the MARGIN SHIFT key.

Check the copy paper size.

●

If an optional paper feed unit is installed, use the TRAY SELECT
key to select the desired paper size.

Set the number of copies and press the START key.

ELECTRONIC SORTING KIT (AR-EB3)

Expanded margin

Copy

Original

Margin is
expanded here.

Electronic

sorting

kit
(AR-EB3)

Summary of Contents for AR-160



















































































Search results

Summary of Contents for AR-160

Reviews:

Related manuals for AR-160

Brands by name

Popular brands

Sharp AR-160, Operation Manual

Search results

Summary of Contents for AR-160

Reviews:

Related manuals for AR-160

Brands by name

Popular brands