Sharp AR-160 Operation Manual Download

Page: 33 / 82

The copier will stop when a misfeed occurs. The misfeed
(

) indicator will blink, and blinking red misfeed location

indicators will indicate the approximate misfeed location.
If paper is accidentally torn during removal, be sure to
remove all pieces.

Be careful not to damage the photoconductive drum.
For misfeeds in optional equipment, see their respective
sections of the operation manual.

First confirm the misfeed location.

MISFEED REMOVAL

Misfeed

removal

Misfeed in the bypass tray

Gently pull the misfed paper out.

Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.

●

The misfeed (

) indicator will go out and the START key indicator

will light up.

Misfeed in the copier

Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.

(

P.57)

(

P.31, 34)

(

P.67)

Summary of Contents for AR-160



















































































Search results

Summary of Contents for AR-160

Reviews:

Related manuals for AR-160

Brands by name

Popular brands

Sharp AR-160, Operation Manual

Search results

Summary of Contents for AR-160

Reviews:

Related manuals for AR-160

Brands by name

Popular brands