Infrared communication
Receiving data
1
In the standby screen,
z
▶
[Tools]
▶
[Infrared]
2
[Receive one item]
3
Perform sending operation on sender's
device
4
Face the infrared ports of the handset and
receiver's devices
z
Follow the instructions on the screen and operate
after this step.
Receiving all data
1
In the standby screen,
z
▶
[Tools]
▶
[Infrared]
2
[Receive all]
3
Enter the authentication code
▶
C
4
Perform sending operation on sender's
device
5
Face the infrared ports of the handset and
receiver's devices
z
Follow the instructions on the screen and operate
after this step.
z
After the operation for receiving, the handset waits to
receive data. Infrared communication automatically
begins when data is sent from sender's device within
approximately 60 seconds.
z
Note that if you select [Delete and register]
▶
[Yes]
when all the phonebook data is received, all the
registered phonebook data will be deleted.
z
Receiving all data may not be available depending on
the data type.
z
When available space in the save destination
becomes insufficient while receiving data, the data
being received to that point are saved and receiving
ends.
174
Data Communication
Summary of Contents for AQUOS SH-02L
Page 1: ...38 398 7 8 6 v SH 02L ...
