Sharp Aquos LC-46PD7X, Operation Manual

Page: 8 / 64

6
Preparation
1
2 2
1
3
1
Insert the stand into the openings on the
bottom of the TV.
2
Insert and tighten the 4 long screws into
the 4 holes on the rear of the TV.
Hex key
Long screw
Soft cushion
NOTE
• To detach the stand, perform the steps in reverse order.
2
2
2
3
3
1
1
Hex key
Short screw
Attach the two supporting post for the stand
unit onto the base using the box for the stand
unit as shown below.
Confi rm the 10 screws supplied with the TV.
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Short screws (
g
6)
(used in step 2)
Long screws (
g
4)
(used in step 3)
1 Insert each of the protrusions on the two
supporting posts into the openings on the
upper side of the base.
2
Insert and tighten the 6 short screws with
the hex key (supplied with the product) in
the order of
1
,
2
and
3
.
(Close-up of the upper side of the stand unit)
46PD7X_en_a.indd 6 46PD7X_en_a.indd 6 2007/01/12 16:29:17 2007/01/12 16:29:17