Sharp Aquos LC-40LE835M, Operation Manual

Page: 42 / 84

40
Optional features settings
Go to “HOME” > “TV Menu” > “Setup” > “Option”.
Setup
Option for view
Option
3D setup
CH list
:Back :Enter
Menu
AQUOS LINK setup
Terminal setting
Selecting the picture size manually
Option
Wide mode
You can select the picture size. Selectable picture size
varies with the type of signal received.
1
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Option for view” > “Wide mode”.
• You can also select an item by pressing WIDE on the
remote control unit.
• The menu lists the “Wide mode” options selectable for
the type of video signal currently received.
2
Press
a
/
b
to select the desired item.
• As you toggle the options, each is immediately reflected
on the screen. There is no need to press
A
.
Basically, if you set “WSS” to “On” in the “Option”
menu, the optimum “Wide mode” is automatically
chosen for every broadcast or programme played
using a VCR or DVD player/recorder.
NOTE
• Even if you select your desired “Wide mode” manually, the
TV may automatically switch to the optimum “Wide mode”
depending on the signal received when “WSS” is set to “On”.
Item (for SD [Standard-Definition] signals)
Normal
Keeps the original aspect ratio in a full
screen display.
Zoom 14:9
For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
also see bars on the top and bottom
with some programmes.
Panorama
In this mode, the picture is stretched
toward each side of the screen. The
picture may appear similar to “Full”
depending on broadcast signals.
Full For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Cinema 14:9
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Item (for HD [High-Definition] signals)
Full
Displays with an overscan image. Crops
all sides of screen.
Underscan
Displays with an underscan image only
when receiving a 720p signal. Displays
with the High-Definition image adjusted
optimally. Noise may appear on the edge
of the screen with some programmes.
Dot by Dot
Displays an image with the same number
of pixels on the screen when receiving
1080i/1080p signals only.
NOTE
• Some items do not appear depending on the type of received
signal.
• You may not be able to change the wide mode while in 3D
mode.
• Refer to page 60 for PC signals.
Selecting the WSS picture size
automatically
Option
WSS
The “WSS” allows the TV to switch automatically among
the different picture size.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “WSS”.
NOTE
• Use “Wide mode” if an image does not switch to the
appropriate picture size. When the broadcast signal contains
no “WSS” information, the function will not work even if
enabled.
• This function is available for 3D images converted from 2D
images or normal 2D images.
Useful viewing functions
LC40LE835_book.indb 40 LC40LE835_book.indb 40 10/7/2011 12:04:48 PM 10/7/2011 12:04:48 PM