Sharp Aquos LC-40LE835M, Operation Manual

Page: 35 / 84

33
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
Go to “HOME” > “TV Menu” > “Setup” > “Picture”
> “Advanced”.
C.M.S.-hue
This function adjusts the hue of a selected colour using a
six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation of a
selected colour using a six-colour adjustment system.
C.M.S.-value
This function adjusts the brightness of a selected colour
using a six-colour adjustment system.
Colour gamut range
Adjusts the range of a subset of colour to display
the image. Expanded colour gamut means more
colourfulness; images become more vivid.
Item
Standard Standard colour gamut.
Expanded More vivid colour with expanded colour gamut.
NOTE
• This function is available only when selecting “MOVIE” or
“MOVIE (3D)” from the “AV mode” menu.
Colour temp.
Adjusts the colour temperature to give the best white
image.
Item
High White with bluish tone.
Mid-High
Intermediate tone between “High” and
“Middle”.
Middle Natural tone.
Mid-Low
Intermediate tone between “Middle” and
“Low”.
Low White with reddish tone.
10 point setting*
Finely adjusts each colour temperature
between 1 to 10 points.
R/G/B Gain (LO),
R/G/B Gain (HI) Adjusts the white balance by changing the
value of each item.
* “10 point setting” is available only when selecting
“STANDARD”, “MOVIE”, “STANDARD (3D)”, or “MOVIE (3D)”
from the “AV mode” menu.
Quick shoot
“Quick shoot” technologies provide superior solutions
for digital display picture quality removing motion blur
(“200/240Scan”, “Scan”, “High”, “Low”, “Off”).
NOTE
• This effect is greater on fast moving images.
• This function will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set to “Off”.
Quad pixel plus
Reproduces high-definition images with higher resolution.
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of
e
2 to a
minimum of
f
2.
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality
(“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).
NOTE
• Film mode is not selectable depending on the input signal
type.
Active contrast
Automatically adjusts the contrast of an image according
to the scene.
DNR (Digital Noise Reduction)
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
NOTE
• This function may not be available depending on the input
signal type.
Monochrome
For viewing a video in black & white.
Range of OPC
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of
e
16 and a minimum of
f
16.
NOTE
• This function is available only when the “OPC” setting is set to
“On” or “On:Display”.
• The maximum setting cannot be set to a smaller number than
the minimum setting.
• The minimum setting cannot be set to a bigger number than
the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Basic adjustment
LC40LE835_book.indb 33 LC40LE835_book.indb 33 10/7/2011 12:04:44 PM 10/7/2011 12:04:44 PM