Sharp Aquos LC-40LE835M, Operation Manual

Page: 36 / 84

34
Audio settings
Go to “HOME” > “TV Menu” > “Setup” > “Audio”.
Setup
Bass
Auto volume
Audio
Treble
[Off]
STANDARD
CH list
:Exit :Enter
Menu
Balance
L30 R30
Audio
Auto volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. This function reduces this problem
by equalizing levels.
Item
High
Strongly reduces the volume gaps
among different sound sources.
Middle
Low
Slightly reduces the volume gaps among
different sound sources.
Off Does not adjust the volume gaps.
Audio
Audio adjustment
You can adjust the sound quality to your preference with
the following settings.
Item
c
(Cursor)
d
(Cursor)
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left speaker
NOTE
• For resetting all adjustment items to factory preset values,
press
a
/
b
to select “Reset”, press
A
, press
a
/
b
to
select “Yes”, and then press
A
.
Audio
Surround
This function produces a surround effect from the
speakers.
Item
3D Hall
Reproduces a concert hall experience
with realistic live surround sound based
on reverberant sounds measured in a
concert hall.
3D Movie
Reproduces a movie theater experience
with realistic live surround sound based
on reverberant sounds measured in a
movie theater.
3D Standard
Creates three-dimensional surround
sound with detailed control of the signal
phase.
SRS TS HD
SRS TruSurround HD™ creates a high
quality surround sound experience,
when watching DVD movies and TV
programmes broadcast in surround
sound.
Off Outputs normal sound.
Audio
Bass enhancer
This function allows you to enjoy bass-enhanced sound.
Audio
Clear voice
This function emphasises speech against background
noise for greater clarity.
Audio
Audio description setting
This function allows you to enable output of audio
description if the TV receives a signal including audio
description.
NOTE
• When the “Audio description” is set to “On”, the audio
description sound is superimposed on the main audio when
you select a broadcast compatible with audio description.
• If you do not clearly hear the sound for the visually impaired,
go to “HOME” > “TV Menu” > “Setup” > “Audio” > “Audio
description setting” > “Mix level”, and select the upper level to
turn up the volume.
• This function is available only for DTV broadcasts. This “Audio
description setting” menu is not displayed for the ATV or the
external inputs.
• The audio description sound is superimposed on the main
audio only when the sound is output on the speaker sound
output, headphone sound output and sound for audio out
output. The sound is not output on the digital audio output
and the HDMI sound output.
• This function is not available for the AQUOS Audio speaker
system.
• This function does not work during time shift playback.
Basic adjustment
LC40LE835_book.indb 34 LC40LE835_book.indb 34 10/7/2011 12:04:44 PM 10/7/2011 12:04:44 PM