TV Menu
- 17
ENGLISH
Selected
item
Description
Bass
Enhancer
This function allows you to enjoy
bass-enhanced sound.
Surround
Sound
Automatically switch the TV to the
best surround sound mode available
from a broadcast. (On,Off)
AVL (Auto
Volume
Leveling)
Reduce sudden volume changes,
for example, during commercials or
when switching from one channel to
another. (On,Off)
Dynamic
Range
Control
Set the control of audio compression
for some digital TV programmes.
(On,Off)
• MPEG-1 and MPEG-2 audio
programmes are not supported.
Digital Audio Output
Selected
item
Description
Audio Format
Select the type of digital audio out.
(PCM, Auto)
Audio Delay
The audio delay timing to set Auto or
Manual for audio/video display timing
adjustment.
Audio Delay
Time (ms)
When Audio Delay set to Manual,
audio delay time to adjust (only if the
Audio Delay is Manual).
Audio Description
Selected
item
Description
Audio
Description
Set the mix of visually impaired audio
with regular audio. (On, Off)
Mixing Level
Adjust the volume of visually impaired
audio.
Setup
Press
MENU
.
Press to select Setup, and press
OK
.
Language
Select the menu display language.
Country
Select the country where you are located.
The TV installs and arranges channels according to
your country.
Tuner Mode
Select the tuner mode. (Antenna, Cable)
Auto Tuning
See page
Channel Setting
.
ATV Manual Tuning
See page
Channel Setting
.
DTV Manual Tuning
See page
Channel Setting
.
DTV Settings
See page
DTV Settings
.
Connection Setting
E
Lip Sync
This option activates an auto audio/video display timing
adjustment function that allows HDMI source devices
to accurately perform synchronization automatically.
All of the above HDMI settings require a proper HDMI
source device. If HDMI source products do not support
these functions, the TV may not work properly when
activating these functions.
NOTE
• In a non-HDMI signal mode, this function is not available.
• If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater than 60Hz or
supports Deep Colour, you will need a Category2 cable.
Conventional HDMI/DVI cables may not work properly
with this mode.
SHARP_LE144E_1_GB_English.indd 17
SHARP_LE144E_1_GB_English.indd 17
5/31/2012 2:55:54 PM
5/31/2012 2:55:54 PM
