7
General notes
Quick TV cloning guide (for the PPV TV)
The steps below show the process of setting TVs for hotel guest rooms.
1
2
3
4
5
6
7
8
Use the remote control unit to set or adjust the TV (TV with the master settings).
(LODGENET users: See pages 9 to 12. ONCOMMAND users: See pages 13 to
16. NXTV users: See pages 17 to 19. nSTREAMS users: See pages 20 to 22.
SeaChange users: See pages 23 to 25.)
Press
MASTER
on the Remote Replicator to turn on the TV. (See page 26.)
Press
MEMORY SELECT
on the Remote Replicator to select the memory bank number in which you
want to store the data. (See pages 26 and 27.)
Connect the TRANSPORT terminal of the TV to the TRANSPORT (RJ-11)
connector of the Remote Replicator with the supplied RJ-11 cable.
•
For NXTV users, perform steps on page 27 before connecting the TV and the
Remote Replicator.
RJ-11 cable
Press
LEARN
on the Remote Replicator to store the TV settings in the Remote Replicator. (See pages 26
and 27.)
Disconnect the RJ-11 cable from the TV (TV with the master settings), and connect to the other TV (TV to
be cloned) that you want to transfer the data.
• For NXTV users, perform steps on page 27 before connecting the TV and the Remote Replicator.
Press
MEMORY SELECT
on the Remote Replicator to select the memory bank number that contains the
data you want to send. (See pages 26 and 27.)
Press
TEACH
on the Remote Replicator to transfer the TV settings. (See pages 26 and 27.)
