17
Watching TV
Language menu
Antenna menu
1.
Setting a language
1
Press
a
/
b
to select the desired language listed
on the screen.
2
Press
SET/ENTER
to enter the setting.
2.
Setting the antenna mode
1
Press
a
/
b
to select “Air” or “Cable” on the screen.
2
Press
SET/ENTER
to enter the setting.
Searching TV channels
CH Search
Air 2
Initial setup
When you turn on the System for the first time, it will automatically memorize the broadcasting channels where
you live. Perform the following steps before you press
TV POWER
on the remote control unit.
1.
Insert the batteries into the remote control unit. (See page 9.)
2.
Connect the antenna cable to the AVC System. (See page 13.)
3.
Plug in the AC cord to the AC outlet. (See page 15.)
3.
Automatic channel searching
Channel auto search makes the System look for all
channels viewable in the set area.
A
• If no channel is found, “No program found. Is antenna
connected properly?” displays. And the auto channel
search finishes.
• If you want to try EZ Setup again, see page 25.
• Channel search function is available for ANT-A only.
• ANT-B cannot perform channel search.
• You may need to manually add the cable converter output
channel setting (fixed), when connecting the cable
converter output signal to the B terminal (ANT/CABLE 75
q
)
on the AVC System (rear).(See page 27.)
Language
English
Français
Español
Air/Cable
Air
Cable
