Sharp Aquos LC 26D7U, Service Manual

Page: 42 / 214

42
LC-26D7U
LC-32D7U
LC-37D7U
PC Set
Activate process command (STEP 1).
KRSW0001
Command is accepted.
ERR
Activate process command (STEP 2).
KKT10037
Process command is activated.
OK
Set two-point adjustment.
MSET0000
Two-point adjustment is set.
OK
Initialize adjustment values.
MSET0004
Initialization is done.
OK
* Low-side adjustment start →
* High-side adjustment start →
Set low-side adjustment point.
SDML0057
Low-side adjustment point is set.
OK
Adjust R and B.
MGLRx x x x , MGLBx x x x
Adjustment values are set.
OK
Completion of low-side adjustment
Set high-side adjustment point.
SDMH0204
High-side adjustment point is set.
OK
Adjust R, G, and B.
MGHRx x x x , MGHGx x x x , MGHBx x x x
Adjustment values are set.
OK
Save adjustment values.
MSET0003
Storing adjustment values
Adjustment values are saved.
OK
Completion of adjustment
Turn off AC power
Repeat until values are
properly adjusted.
Repeat until values are
properly adjusted.
Initialization of adjustment values for
adjustment pattern display
Initialization of adjustment values for
adjustment pattern display
Setting adjustment values
Reflecting specified values
Setting adjustment values
Reflecting specified values
Completion of high-side adjustment
(4) White balance adjustment sequence
Adjustment is available in any input or position. There is no specific order to adjust high and low, either.