Sharp Aquos LC 26D7U, Service Manual

Page: 61 / 214

61
LC-26D7U
LC-32D7U
LC-37D7U
TROUBLE SHOOTING TABLE
(Continued)
Are HDMI_Y/Pb/Pr and HDMI_H/V
signals supplied to pins (8), (6), (10),
(14) and (12) of MAIN unit connector
(SC3201) respectively?
Is IC1913 (E2PROM) accessed by I2C to
read out DDC I2C CLOCK/DATA when
HDMI equipment is connected?
Are signals supplied from HDMI (SC1901)
connector to input terminals H_RX0
±
(pins 87 and 86), H_RX1 ± (pins 92 and
91), H_RX2 ± (pins 97 and 96), and
H_RXC ± (pins 84 and 83) of IC1912
(HDCP_LSI)?
Check HDMI equipment settings.
Are HDMI_Y/Pb/Pr and HDMI_H/V
signals supplied to pins (3), (7), (27) of
IC3703 (L.P.F.) and pins (4) and (12) of
IC3701 (SYNC_SELECTER)
respectively? Check IC3703, IC3701 and the
peripheral circuits.
Are HDMI_Y/Pb/Pr and HDMI_H/V
signals sent from pins (26), (28), (24),
(20) and (22) of AV unit connector
(SC5701) respectively?
Check IC1912 (HDCP_LSI) and the
peripheral circuits.
Check FD harness for disconnection.
Check IC1913 and the peripheral
circuits.
Is there HDMI_RST signal output at
output pin (6) of IC1914 (EXPANDER)?
Check IC1914 and the peripheral
circuits.
Check IC1912 and the peripheral
circuits.
No HDMI input picture
YES
YES
NO YES
YES
NO
NO
NO
YES
NO
YES
NO
2 Tip HDCP LSI