Sharp Aquos LC 26D4U Service Manual Download Page 21

Page: 21 / 108

LC-26D4U
LC-32D4U
LC-37D4U

Shut off the AC power to the unit (unplug the AC cord), and remove the SD card for version upgrade.

Now the software version upgrade is complete.

Note: When you are done with the software version upgrade, start the set, go to the top page of the adjustment

process screen and check the main software version information.

2-3 Monitor microprocessor software version upgrade

Get ready before you begin

Get ready the same items as listed in the "Main software version upgrade".

Preparation

Create the SD card for monitor microprocessor software version upgrade in the same manner as explained in

the "Main software version upgrade". Copy the binary image file for monitor microprocessor software version

upgrade to the SD card drive.

How to upgrade the software

During the monitor microprocessor software version upgrade, the progress of upgrading is not shown on the

display screen. The upgrading process is seen in the blinking of the power LED.

Shut off the AC power to the unit (i.e. unplug the AC cord).

Insert the SD card for version upgrade (prepared as above) into the service socket located below left of the

right side cooling fan in the rear of the unit, in a way that the cut corner of the SD card comes at the right-

hand side.

Note: If the SD card is inserted in a wrong way, the card will go deep inside the unit beyond retrieval. Take due

care to insert the SD card correctly.

While depressing the SYSTEM RESET button located in the rear left side of the unit, turn on the AC power

(i.e. plug in the AC cord).

Note: After the unit is started, you may release the SYSTEM RESET button.

Caution!!

The moment this operation is done, the upgrading of the monitor microprocessor software starts.

While the upgrade is ongoing, never power off the unit. Otherwise the upgrade will fail and the

system may have a serious damage beyond recovery (inability to start).

After the unit startup, the power LED starts blinking within 10-20 seconds.

Wait until the power LED stops blinking, the unit restarts automatically, and the normal startup screen

appears (it will take 2-3 minutes).

Shut off the AC power to the unit (unplug the AC cord), and remove the SD card for version upgrade.

Now the software version upgrade is complete.

Note: When you are done with the software version upgrade, start the set, go to the top page of the adjustment

process screen and check the monitor microprocessor software version information.

Summary of Contents for Aquos LC 26D4U













































































































Search results

Summary of Contents for Aquos LC 26D4U

Reviews:

Related manuals for Aquos LC 26D4U

Brands by name

Popular brands

Sharp Aquos LC 26D4U, Service Manual

Search results

Summary of Contents for Aquos LC 26D4U

Reviews:

Related manuals for Aquos LC 26D4U

Brands by name

Popular brands