Sharp AJ-1805 Online Manual Download Page 49 | Manualshive

Page: 49 / 62

background image

47

Troubleshooting

How to Use the

Online Manual

Printer Properties

Print

Print Status

Window

Maintenance

Troubleshooting

Sharing Printer

Failed to Install the Printer Driver (USB Interface)

If the printer is connected to your computer by USB cable, you must install the USB driver.
If the "Add New Hardware Wizard" window does not appear while the printer and your computer are connected
to each other and both powered on, confirm that the USB port is available following the steps below.

1111

Click the "Start" button, select "Settings", and then
click "Control Panel".

2222

Double-click the "System" icon and click the
"Device Manager" tab.

The last item listed in the Device Manager should be
"Universal serial bus controller".

3333

Click the (

) icon beside the "Universal serial bus

controller".

Two items will display, your Controller chipset type and
Root Hub. If these items appear, you can use USB port. If the
"Universal serial bus controller" shows a yellow
exclamation point or does not appear, you must check your
computer manual for USB troubleshooting or contact your
computer manufacturer.

4444

After the USB port becomes available, install USB
driver referring to "SETTING UP FOR Windows" in
the Setup Guide and Operation Manual.

!

On Windows 2000, double-click the "System" icon,
select the "Hardware" tab, and click the "Device
Manager" button.

!

If the "System" icon does not appear on Windows
Me, click "view all Control Panel options" to view it.

«
...
47
48
49
50
51
...
»

Summary of Contents for AJ-1805































































Reviews:

No comments

Related manuals for AJ-1805

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 341

Brand: Samsung Pages: 8

CLX2160N - Color Laser - All-in-One

Brand: Samsung Pages: 118

CLX 3160FN - Color Laser - All-in-One

Brand: Samsung Pages: 142

CLP-770ND - Color Laser Printer

Brand: Samsung Pages: 2

CLP 610ND - Color Laser Printer

Brand: Samsung Pages: 114

Brand: Samsung Pages: 6

Brand: Samsung Pages: 15

CLP 600N - Color Laser Printer

Brand: Samsung Pages: 227

CLP 600N - Color Laser Printer

Brand: Samsung Pages: 118

CLP 300N - Network-ready Color Laser Printer

Brand: Samsung Pages: 94

CJX-2000FW Series

Brand: Samsung Pages: 2

4116 - SCX B/W Laser

Brand: Samsung Pages: 205

3561ND - B/W Laser Printer

Brand: Samsung Pages: 252

3561ND - B/W Laser Printer

Brand: Samsung Pages: 127

Brand: Samsung Pages: 314

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands