Sharp Actius PC-AV18P Operation Manual Download Page 32

Page: 32 / 128

2-9

Gently push the tray back into your computer.

•

Do not leave the tray pulled out. Also, avoid touching the lens in the
tray. If the lens becomes dirty, the disk may malfunction.

•

Do not wipe the lens with materials with rough surface (such as paper
towels). Instead, use a cotton swab to gently wipe the lens.

Removing Disk

Make sure the optical drive indicator is not lit and press the eject button. The
optical drive tray will pop out.

Make sure the optical drive indicator is not lit or blinking before pressing
the eject button.

Gently pull out the tray.

Remove the disk from the tray by holding its edge.

Gently push the tray back into your computer.

Summary of Contents for Actius PC-AV18P

































































































































Search results

Summary of Contents for Actius PC-AV18P

Reviews:

Related manuals for Actius PC-AV18P

Brands by name

Popular brands

Sharp Actius PC-AV18P, Operation Manual

Search results

Summary of Contents for Actius PC-AV18P

Reviews:

Related manuals for Actius PC-AV18P

Brands by name

Popular brands