background image

Picture adjustment

The following table lists the adjustment items shown in the PICTURE menu and how they

change as you press 

 / 

.

*: TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only)

• WHITE TEMP can only be adjusted on PICTURE menu.

TV/VIDEO

TV

0

NORMAL

TIMER

FEATURE

CH-SET

PICTURE

4

7

2

8

3

6

9

CH

CH

1

5

CH

CH

NORMAL

PICTURE

CONTRAST

Selected item

Press

Press

COLOUR

BRIGHTNESS

TINT

SHARPNESS

To decrease contrast

For less colour intensity

For less brightness

To move tint toward red

For less sharpness

To increase contrast

For more colour intensity

For more brightness

To move tint toward green

For more sharpness

-                          +

-                          +

-                          +

-                          +

WHITE TEMP

To more reddish  

background

To more bluish background

PICTURE

CONTRAST

50

COLOUR

0

BRIGHTNESS

+10

TINT

SHARPNESS

-10

WHITE TEMP

-

+

 CONTRAST          

50

!

Press 

PICTURE

 to call PICTURE screen.

@

Press 

CH

 / 

CH

 to select adjustment items.

#

Adjust using 

 / 

 .

• Wait for approximately three seconds to return to PICTURE menu.

$

Repeat steps 2 and 3 above to adjust other items.

%

Press 

PICTURE

 to return to normal screen.

 0:00

 0:01

 0:02

 0:03

 0:04

OFF

OFF

OFF

OFF

OFF

OFF

 0:05

F l a s h i n g

TIMER

OFF

 2:30

ON

--:-- 

--:-- 

POSITION

VOLUME

TIMER

OFF

--:--

ON

--:-- 

--:-- 

POSITION

VOLUME

!

Press 

TIMER

 to call TIMER screen.

@

Press 

CH

 / 

CH

 to select “OFF  ”.

#

Press 

 / 

 to set time for  TV to turn

off.

• Maximum time that can be preset is 12 hours and 50

minutes. Timer start to count down after setting.

$

Press 

TIMER

 to return to normal screen.

• Five minutes before the preset length of time expires, the remaining time

appears on the screen.

• A flashing display of the remaining time appears during the last few seconds.

When the preset length of time has passed, the TV set enters the Standby
mode.

Off timer

Automatically turns power off after a set length of time has passed.

!

Press 

TIMER

 to call TIMER screen.

@

Press 

CH

 / 

CH

 to select “ON  ”.

#

Press 

 / 

 to set time for  TV to turn

on.

• Maximum time that can be preset is 12 hours and 50

minutes. Timer start to count down after setting.

$

Press 

CH

 / 

CH

 to select “POSITION”.

%

Press 

 / 

 to set the channel.

^

Repeat step 4 to 5 above to select and set the

“VOLUME”.

&

Press 

TIMER

 to return to normal screen.

*

Press 

 to put TV set into Standby mode.

• Power indicator will flash to indicate On Timer is set.
• When the preset length of time setting has passed, the power turns on and a

picture appears on the screen.

• The ON TIMER speaker volume gradually increases from zero to preset

volume.

On timer

Automatically turns power on after a set length of time has passed.

TV/VIDEO

TV

0

NORMAL

TIMER

FEATURE

CH-SET

PICTURE

4

7

2

8

3

6

9

CH

CH

1

5

CH

CH

TIMER

[ TV Set (Bottom) ]

Power indicator 

(Flashing)

TIMER

OFF

--:--

   --

   --

ON

 8:00 

--:-- 

POSITION

VOLUME

TIMER

OFF

--:--

ON

 8:00

 CH28 

--:-- 

   -- 

POSITION

VOLUME

TIMER

OFF

--:--

ON

 8:00

 CH28 

--:-- 

   20 

POSITION

VOLUME

• Pressing 

NORMAL

 while a PICTURE selection is displayed, only the selected mode is reset to the standard  (factory-

setting) position.

• Pressing 

NORMAL

 while a PICTURE menu screen is displayed will reset all the item of PICTURE menu to the standard

(factory-setting) position.

• The Off timer is cancelled if the power is turned off or set to the Standby mode using 

 on the remote control or

POWER

 on the TV set, or if the power is otherwise interrupted.

• The On Timer is cancelled if the power is turned off using 

POWER

.

• If the TV set is turned on by the On Timer, then the TV set will be automatically turned off in two hours if no buttons

are pressed on the TV set or remote control.

E8

TIMER SETTING

E7

SETTING AND ADJUSTMENT (Continued)

21JF2-SA-EN

8/24/05, 4:55 PM

5

Summary of Contents for 21JF2-GA









Reviews: